270KN/27T hydraulic anchor winch planetary gear effort efficient factory direct
» Brief Introduction
The hydraulic drive winch transforms the hydraulic energy into mechanical energy obtained by the hydraulic motor through the hydraulic system, decelerates and increases the torsion through the planetary reducer, produces a great torque on the drum, and drag heavy objects by winding the steel wire rope on the drum.
Operation of wrecker winch
1. Start the vehicle first, put the gear in neutral position, step on the clutch, open the force taking device, before the hydraulic capstan operation, put the plate down first, pay attention to the rear lift in the process of the plate down, adjust the height of the rear lift according to the position of the plate down, and lower the plate to the appropriate position.
2. Release the winch clutch, pull out the wire rope to be removed before the fault vehicle, hook the hook of the traction hook of the vehicle on the back, and then combine the clutch of the winch, pay special attention to that when the wire rope is pulled out, the number of remaining wire rope loops shall not be less than 5.
3. At this point to fault vehicle GuaKongDang, let go of the fault of the vehicle parking brake, then winch operating lever operation, fault vehicle will pull to the tablet, and control the hook from the winch is more than 40 cm, when winch by load, do not open the winch manual control of clutch, that this might damage the winch, for car chassis is low, have to be very careful when operating, Avoid secondary damage to the vehicle.
4. After dragging the faulty vehicle onto the car, use straps to fix the vehicle tires. After fixing the tail of the plate slowly rises, about 15cm from the ground, move the plate forward to carry 60cm from the front end, adjust the height of the plate to the horizontal position, and finally move the plate to the front end.
5. Pull on the parking brake of the faulty vehicle, gear in the position of first gear (automatic gear in P gear position), check whether the strap is firm, pay attention to the details of the check, after the check is correct, step on the brake car clutch, turn off the force extractor, the operation of the faulty car is completed.
» Main Application
Hydraulic winch is a vehicle tool used in automobiles and special vehicles for self-rescue and self-discharge in off-road driving under difficult road conditions.
It can also be used for lifting and pulling heavy objests in construction site,such as engineering installation,oil field drilling,road clearing etc.
It is characterized by compact structure,small size,light weight,large pulling force,simple installation,flexible operation,convenient maintenance,and the hydraulic system of the car itself.
27T hydraulic winch. In terms of hydraulic winch applications, it not only shows very good function in the application, but also improves the ease of lifting and lowering many materials for everyone.
1: easy to operate. When you need to use them to lift and lower material, you can operate easily. The device can be operated in a simple manner.
2: Easy to use. Hydraulic winches can be used in a variety of applications to lift and lower materials because of their excellent suitability for material types and service environments.
» Performance
| Rated Line Pull(1st layer) | 269KN/27000kgs/60000lbs |
| Line Speed(1st layer) | 10M/Min |
| Response Pressure of Brake | ＜2.5Mpa/25Bar |
| Oil Pressure | 14Mpa/140Bar |
| Oil Flow | 280L/Min |
| Drum DiameterxBottom DiameterxLengh(Internal) | 570x300x300mm |
| Drum Capacity | 50m |
| Suggested High-Intensity Wire Rope Diameter | ∅30mm |
| Net Weight | 720Kg |
» Product structural drawing
» Features of Hydraulic Winch
1. Full-float typed planetary gear reducer makes the operation more stable, the structure more reasonable.
2. Adopt multidisc-typed friction normally-closed arrester makes the brake torque larger, safer and more reliable.
3. The product is featured by its small size, compact construction and high transmission efficiency.
4. Free wire releasing function.
5. Adopt motor with long use life.
6. The installation bracket can be manufactured according to the customer's requirement.
7. According to the requirement of customers, manufacture the balance valve and shuffle valve special for this winch.
8. Adopt manual, pneumatic clutch equipment.
» Company Profile
We are the manufacturer,we can save money from middleman.
» FAQ
Q: Are you trading company or manufacturer ?
A: We are factory, established in 1998.
Q: What is your terms of payment?
A: T/T 30% in advance, 70% see the B/L copy.
100% Irrevocable LC
Q: What is your terms of delivery?
A: FOB, CFR ,CIF, DDU or as your requirement
Q:Do you supply customized service?
A: Sure! We are manufacturer, and we have our own engineer group. They can work out customized design according to your special requirement.
Q: How about your delivery time?
A: Generally it will take 3 to 25 days after receiving your advance payment. The specific delivery time depends on your purchase quantity.
Q: How about package?
A: Wooden box conforming to export standards.
Q:What information should I provide to you before you could recommend a suitable winch and quote for me?
A: 1. Intended application of the winch (including working condition)
2. Line pull (KN / kgs / lbs)
3. Line speed (m/min)
4. Drum capacity/rope length (m)
5. Rope diameter(if have)
6. Oil pressure and oil flow (if have)
7. Other special requirements
Reach out to us for a complimentary consultation.
Product Tags:
|
|
270KN/27T hydraulic anchor winch planetary gear effort efficient factory direct Images
|
